Journal Publications (sorted by Impact Factor)
1. S. Seddighi, P. Clough, E. J. Anthony, R. Hughes, P. Hu, “Scale-up Challenges and Opportunities for Carbon Capture by Oxy-Fuel Fluidized Beds”, Applied Energy (JIF:7.9), Volume 232, 527-542, 2018.
2. S. Seddighi, "CO2-based reconfigurable enhanced oil recovery using the oxy-fuel-fired boilers: Thermal and flow properties." Journal of Cleaner Production (JIF: 5.715). Volume 162, 1346-1355, 2017.
3. H. Abdolahi, S. Seddighi, “H2S and CO2 capture from gaseous fuels using nanoparticle membrane”, Energy (JIF:4.96), Volume 168, Pages 847-857, 2019.
4. S. Seddighi, “Design of large scale oxy-fuel fluidized bed boilers: Constant thermal power and constant furnace size scenarios”. Energy (JIF:4.96). Volume 118, Pages 1286–1294, 2017.
5. J. Bashtani, S. Seddighi, and I. Bahrabadi-Jovein, “Control of Nitrogen Oxide Formation in Power Generation Using Modified Reaction Kinetics and Mixing”, Energy (JIF:4.52), Volume 145, Pages 567-581, 2018.
6. S. Seddighi, D. Pallarès, F. Normann, F. Johnsson and V. Yla-Outinen. “Heat Transfer to Walls of an Oxy-Fuel CFB Furnace: Measurement and Modeling in a 4MWth Unit”, International Journal of Greenhouse Gas Control 37 (JIF: 4.08), Pages 264–273, 2015.
7. S. Seddighi, D. Pallarès, F. Normann, and F. Johnsson. " Heat extraction from a utility-scale oxy-fuel-fired CFB boiler." Chemical Engineering Science 130 (JIF: 3.44), Pages 144–150, 2015.
8. I. Bahrabadi-Jovein, S. Seddighi, and J. Bashtani, “Sulfur Dioxide Removal Using Hydrogen Peroxide in Sodium- and Calcium-Based Absorbers”, Energy & Fuels (JIF:3.09), Volume 31, Issue 12, Pages 14007–14017, 2017.
9. S. Seddighi, D. Pallarès, F. Normann, and F. Johnsson. "Carbon Monoxide Formation during Oxy-Fuel-Fired Fluidized-Bed Combustion." Energy & Fuels 27 (JIF: 3.09), no. 4, Pages 2275-22822, 2013.
10. S. Seddighi, D. Pallarès, F. Normann, and F. Johnsson. "Progress of combustion in an oxy-fuel circulating fluidized-bed furnace: measurements and modeling in a 4 MWth boiler." Energy & Fuels 27 (JIF: 3.09), no. 10, Pages 6222-6230, 2013.
11. M. Zamani, S. Seddighi, H. Nazif, “Erosion of Natural Gas Elbows due to Rotating Particles in Turbulent Gas-Solid Flow”, Journal of Natural Gas Science and Engineering (JIF: 2.04), Volume 40, Pages 91-113, 2017.
12. Y. Oghabneshin, S. Seddighi, M. zabetian, A. Mohammadebrahim, “Experimental and numerical analysis of the in-cylinder swirl flow dependence on the pressure”, Heat and Mass Transfer (JIF:1.49), accepted for publication, 2018.
13. Y. Oghabneshin, S. Seddighi, M. zabetian, A. Mohammadebrahim, “Experimental and numerical simulation of in-cylinder swirl flow velocity measurements in steady flow test rig with the swirl meter”, Modares Mechanical Engineering Journal, Vol. 17, No. 3, pp. 327-335, 2017 (in Persian).
14. Bahrabadi, S. Saddighi, J. Bashtany,” Simulating the effects of different absorbers for reduction reducing of SO2 from flue gases of in industrial boilers”, Modares Mechanical Engineering Journal, Vol. 17, No. 3, pp. 425-436, 2017 (in Persian).
Conference Publications
1. H. Babaei, S. Seddighi, Nano Catalyst Utilization for Automotive DeNOx Systems, 7th International Conference on Nanostructures (ICNS7), 2018, Tehran, Iran.
2. H. Abdolahi, S. Seddighi, Nanoparticle Utilization for Natural Gas Desulfurization, 7th International Conference on Nanostructures (ICNS7), 2018, Tehran, Iran.
3. S. Seddighi, Industrial Design of New Generation of Power Plants Based on Oxy-Fuel Technology, 7th Fuel and Combustion Conference of Iran (FCCI-2018), 2018, Iran.
4. H. Abdolahi, S. Seddighi, Removing H2S and CO2 from Natural Gas using Membranes, 7th Fuel and Combustion Conference of Iran (FCCI-2018), 2018, Tehran, Iran.
5. H. Babaei, S. Seddighi, Reduction of Combustion Emission using Aftertreatment Systems, 7th Fuel and Combustion Conference of Iran (FCCI-2018), 2018, Tehran, Iran.
6. S. Seddighi , et al. "Assessment of oxyfuel circulating fluidized bed boilers–modeling and experiments in a 5 MW pilot plant." 2nd IEA GHG International Oxyfuel Combustion Conference, 2011, Queensland, Australia.
7. S. Seddighi, et al. "One-dimensional modeling of oxy-fuel fluidized bed combustion for CO2 capture." 2010 Gyeong-ju, South Korea.
8. S. Seddighi, et al. "Mapping operation modes for a utility-scale oxy-fuel CFB boiler”, 4th Workshop on oxyfuel FBC Technology, 2014, China
9. I. Bahrabadi, S. Saddighi, J. Bashtany,” Analysis of the effects of power plants on the emission of Tehran “, 25th International Conference on Mechanical Engineering, 2017, Tehran, Iran
- 10. J. Bashtani, S. Saddighi, I. Bahrabadi,” Experimental and numerical investigation of NOx emission by increasing catalyzer under FLOX condition “, 25th International Conference on Mechanical Engineering, 2017, Tehran, Iran
11. Y. Oghabneshin, S. Seddighi, M. zabetian, A. Mohammadebrahim, “Experimental and numerical simulation of in-cylinder swirl flow velocity measurements in steady flow test rig”, 25th International Conference on Mechanical Engineering, 2017, Tehran, Iran
12. M. Zamani, S. Seddighi, H. Nazif, “Investigating the effects of particle rotation on the Elbow Erosion using computational fluid dynamics”, 25th International Conference on Mechanical Engineering, 2017, Tehran, Iran
13. M. Zamani, S. Seddighi, H. Nazif, “Numerical Investigation of Elbow Erosion of Oil and Gas Sector”, 1st International Conference on Research Achievements in Mechanic, Mechatronic & Biomechanics (In Persian), 2016, Tehran, Iran.
14. S. Seddighi, et al. “Integral safety system in railway transportation”, Railway Research Center bulletin (In Persian), 2005, Iran.
15. M. Mahdizadeh, S. Seddighi, M. Mohammadpour, Generated energy as an index for locomotive performance, 7th Conference on Railway Transportation (In Persian), 2004, Iran.
16. S. Seddighi, A. Fathi, Economic and technological analyzes of new technologies in fuel consumption optimization, conference of optimization of fuel consumption in transportation (In Persian), 2004.
17. Mahdizadeh, S. Seddighi, Gas locomotives, Railway Research Center bulletin (In Persian), 2005, Iran.